1. Plug in the power supply, and the machine show that it is powered on and enters the standby state, and the digital tube displays off normally. This machine is set to stand-alone power-on, double-click power off! 2. In the standby state, click the red button.the machine key is turned ON, and the display is ON. If no function operation is performed within 5 seconds after the machine is turned ON, only the measured water temperature is displayed. 3. After starting up, click the "firepower" key to adjust the firepower. The minimum is 60W and the maximum is 700W. Click the function key to select any of the six functions. [When the water temperature reaches 100 degrees, adjust the power above 300W when heated with big fire, it will automatically turn to medium heat; Adjust 100 to 300, normal operation]] 4. In the power-on standby state, click the "appointment" key to select the required warm-up time. The shortest time is 30 minutes and the longest time is 24 hours. Click the reservation button to increase the number of times within 30 minutes. Then, select the function. If no operation is performed within 5 seconds after the function is selected, the function is selected. At this time, the corresponding function indicator light is on, and the countdown time is displayed digitally. When the set time is reached, it will start automatically according to the set function. 5. This machine is equipped with original identification procedures, which are applicable to some plateau areas
Heat preservation: In standby mode, click" Start ". The buzzer beeps and the digital display is ON. Then click Functions key to heat preservation.When the "heat preservation" indicator blinks, click the "Fire button" to adjust the required temperature at 10 degree [the temperature adjustment range is 40-90 degrees].The heat preservation indicator blinks three times. After buzzer "B" beeps, the heat preservation indicator lights up and the heat preservation function starts.After the heat preservation function is started, semi-automatic detection of water temperature, if the water temperature is lower than the set temperature, the product will be heated to the set temperature of 24 degrees.Insulation completed.The heat preservation indicator blinks three times, and the buzzer "B" beeps three times to enter the shutdown program.Digital Display "OFF"
Each function is operable, you need to double-click shutdown, and then click restart to select other functions.Otherwise, the function will be locked.please kindly note.
Function Cooking soup In the standby state, the single machine 'boot/standby 'key once, the buzzer' B 'sound, digital display 'ON', then the single machine 'function' key to the soup cooking function, the indicator light of 'soup cooking' flashes three times, after the buzzer 'B' sounds, the indicator light of 'cooking soul' is always on, and the function of cooking soul' is started. The product burns the water to boiling in high heat and then turns to low heat for 60 minutes. After 60 minutes of working, the indicator light of making soup flashes three times, and after the buzzer 'B' three times, the working procedure of making soup is completed. The thermal insulation indicator light turns to 45 degree thermal insulation, and the thermal insulation procedure is completed after 6 hours. The insulation indicator light flickers for three times, and the shutdown process enters with three sound 'B'. At this time, the digital display 'OFF'